End of Repair Service Notice for Taper-tip Flexible Loggers
When utilizing more than 1 data logger, identifying the location of each specific logger becomes very important to the project itself. Without this, it becomes very difficult to trace what set of data is attributed to which logger at a quick glance. Identifying each logger becomes imperative to the task at hand, yet that doesn’t make the task of doing so any easier.
To facilitate this, Mesa now offers identification sleeves to be able to locate and position the DataTrace Loggers in autoclaves, smokehouses, various chambers, etc. Available in yellow, red or white, the sleeves are pre-numbered from 1-25 making the job of identifying your loggers very simple.
Positioning the loggers in conjunction with a schematic of any vessel allows the user to quickly identify any cold or hot spots within the process cycle. This allows users to configure the loggers with the corresponding sleeve number within DT Pro Software meaning the logger will have the same number in its firmware when programmed or read as the identifying sleeve.
It is much more efficient to place the logger with the corresponding sleeve number in the appropriate location laid out in the schematic of the users’ vessel, etc. Logger one always goes in location one and so forth.
In addition, DT Pro Software has a placement tab that the user can scan in their vessels schematic with the appropriate points to place the DataTrace data loggers. This makes the use of loggers in any type of project 100% easier to organize. For more information please contact us today! datatracesales@mesalabs.com
Let’s talk data loggers!
Talk with one of our experts to get your questions answered and see how we can help you solve your data logger pain points.
Related posts
