Ecklund Accessories

datatrace-general-accessories-supporting-01

Part number: 210279-001

Description: Combination can punch and countersink to create a hole for installation of receptacle, C-11


datatrace-general-accessories-supporting-02

Part number: 210279-004

Description: Lever-type can punch to create a hole for installation of a Thermowell Datalogger


datatrace-general-accessories-supporting-03

Part number: 210279-003

Description: Lever-type can punch to create a hole for installation of a receptacle, C-12


datatrace-general-accessories-supporting-04

Part number: 210279-002

Description: Awl to make pilot hole for C-11 punch


datatrace-general-accessories-supporting-05

Part number: 200156-001

Description: Spanner wrench with handle for use with the IR Standoffs


datatrace-general-accessories-supporting-06

Part number: 200161-001

Description: Rubber grommet to provide additional sealing for the Screw Coupling


datatrace-general-accessories-supporting-07

Part Number: 210278-001

Description: Stainless Steel, two-piece receptacle for metal containers, C-5


datatrace-general-accessories-supporting-08

Part Number: 210278-005

Description: Delrin, two-piece receptacle for metal containers, C-5D


datatrace-general-accessories-supporting-09

Part Number: 210278-002

Description: Brass, two-piece receptacle for plastic pouches, C-5.1


datatrace-general-accessories-supporting-10

Part Number: 210278-004

Description: Brass, two-piece receptacle for plastic pouches, C-5.1M


datatrace-general-accessories-supporting-11

Part Number: 123460-500

Description: Modified Hex Nut for C-5 Fitting


datatrace-general-accessories-supporting-12

Part Number: 210044-500

Description: Gasket for C-5 receptacles (pkg of 100), C-16


Part Number: 124859-001

Description: Gasket for C-5.1 receptacles (pkg of 100), C-26


ID/Interface Sleeves

datatrace-general-accessories-supporting-13

Part number: 124930-001

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Yellow, bag of 25


datatrace-general-accessories-supporting-14

Part number: 124930-002

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. White, bag of 25


datatrace-general-accessories-supporting-15

Part number: 124930-003

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Red, bag of 25


datatrace-general-accessories-supporting-16

Part number: 122028-001

Description: 0.8 inch inner diameter acrylic PC interface sleeve, for use with dual housing MPRF loggers


Screw Couplings

datatrace-general-accessories-supporting-18

Part number: 124601-500

Description: Allows the DataTrace® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For taper tip ONLY


datatrace-general-accessories-supporting-17

Part number: 124299-500

Description: Allows the DataTrace® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For bullet tip ONLY


Pressure Adapters

Part number: 124963-125

  • Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Union Fitting

Part number: 124964-125

  • Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Tube Fitting

Part number: 124964-006

  • Description: MPRF/MPIII Pressure Adapter with 0.24″ (6 mm) Tube Fitting

datatrace-general-accessories-supporting-19

Part number: 200194-001

  • Description: MPRF/MPIII Pressure Adapter with ¾” Tri-Clamp Fitting

Part number: 200195-001

  • Description: MPRF/MPIII Pressure Adapter with 1½” Tri-Clamp Fitting

Part number: 200196-500

  • Description: MPRF/MPIII Pressure Adapter with 3” Tri-Clamp Fitting

Part number: 200197-500

  • Description: MPRF/MPIII Pressure Adapter with 4” Tri-Clamp Fitting

rH Accessories

datatrace-general-accessories-supporting-20

Part Number: 124752-040

Description: Dustfilter to protect RH sensor


datatrace-general-accessories-supporting-21

Part Number: 124756-002

Description: Solid cap – extended to protect RH sensor during temperature calibration in a bath


Magnetic Holder

datatrace-general-accessories-supporting-22

Part Number: 200204-002

Description: Clip attached to a magnet. Attaches logger to inside of Application Chamber/Rack for use in Temperature Mapping

Related products

Related services